Door mirror installation details
1 - Regulator handle; 2 - Triangular decorative cover; 3 - Protective cover; 4 - Mirror housing; 5 - Mirror
Removing
1. The installation details of the door mirrors are shown in the illustration.
2. Disconnect the negative cable from the battery.
Attention! If the stereo system installed in the car is equipped with a security code, before disconnecting the battery, make sure that you have the correct combination to activate the audio system!
3. Remove the inner triangular decorative panel.
4. On models with manual mirror adjustment, remove the set screw and remove the adjustment knob.
5. On models with power mirrors, disconnect the appropriate electrical wiring.
6. Give fixing nuts and remove a basic arm of a door furnish.
7. Remove the mirror from the car.
Installation
1. Install the mirror in its original place.
2. Install the trim bracket and tighten the fixing nuts.
3. Depending on the design of the drive, restore the original wiring connection, or install the regulator handle.
4. Install the triangular decorative panel.
5. Connect the negative cable to the battery.
6. At the corresponding complete set check up serviceability of functioning of the electric drive of a mirror.