Removing
1. Disconnect the negative cable from the battery.
Attention! If the stereo system installed in the car is equipped with a security code, before disconnecting the battery, make sure that you have the correct combination to activate the audio system!
2. If necessary, remove the corresponding upholstery panels for the luggage compartment/door/cover.
3. Release the locking tab securing the lock cylinder in the outer handle/trunk lid release button assembly.
4. Remove the cylinder.
Installation
1. Fill the cylinder into the mounting hole, - make sure that the locking tab snaps into place.
2. If removed, replace upholstery panels.
3. Connect the negative cable to the battery.