Removing
1. Disconnect the negative cable from the battery.
Attention! If the stereo system installed in the car is equipped with a security code, before disconnecting the battery, make sure that you have the correct combination to activate the audio system!
2. Remove latch assembly with outside door handle.
3. Release the locking tab securing the lock cylinder to the outside door handle.
4. Remove the lock cylinder from the outside handle and release the lighting wiring from the hole in the assembly.
Installation
1. Pass the electrical wiring of the lock illumination into the hole in the door handle, then install the lock cylinder in its place, - make sure that the locking tongue snaps into place.
2. Install the latch door handle assembly in its original location.
3. Connect the negative cable to the battery.