Checking and adjusting the clutch pedal

1. Fold up the mat under the clutch pedal.

2. Measure the height A of the clutch pedal (pic. 11.1). Nominal value A: 162-165 mm.



3. If the clutch pedal height is not correct, loosen the lock nut and adjust the pedal height with the adjusting bolt or piston rod (pic. 11.2).



4. Measure the gap in the clutch pedal (pic. 11.3). Rated value: 1-3 mm.



5. If the clutch pedal clearance does not match, adjust it with the piston rod.

Attention! In this case, the piston rod of the clutch master cylinder must not be pressed in.

6. After adjustment, check the distance D between the clutch pedal and the floor with the clutch pedal depressed (pic. 11.4). Rated value: 85 mm or more.