Car engine cooling system Mitsubishi Colt 5 (CJ)

Coolant pump and pipes (4G1 since 1995)
The pump and pipes of the cooling system of SOHC engines with a carburetor are shown in fig. 3.18, SOHC engines with MPI injection - in fig. 3.19, 16V SOHC engines with...

Coolant pump (4G9)
The SOHC engine cooling pump is shown in fig. 4.11. Pic. 4.11. SOHC Engine Coolant Pump: 1 - Branch pipe (except carbureted engines); 2 - Branch pipe; 3 - Coolant...

Technical Data for Cooling System Maintenance
Maintenance data is given in table 5.1. Table 5.1. Maintenance data Options Ratings limit value Opening pressure of the safety valve on the radiator cap, kPa 74-103 64...

Thermostat — design description
The thermostat is shown in fig. 5.1. Pic. 5.1. Thermostat: 1 - Lower radiator pipe; 2 - Wiring connector; 3 - Thermostat cover; 4 - Thermostat.

Thermostat — check and installation
Examination 1. Immerse the thermostat in water and heat it up while stirring (pic. 5.2). Check if the thermostat opening temperature is correct. Nominal valve opening...

Coolant Pump — Design Description
The pump of the 4G1 engine cooling system is shown in fig. 5.5, and the pump of the 4G9 engine cooling system - in fig. 5.6. Pic. 5.5. 4G1 engine cooling pump: 1 -...

Radiator of the cooling system — design description
The radiator of the cooling system is shown in fig. 5.7. Pic. 5.7. Radiator of the cooling system: 1 - Drain cock; 2 - Radiator plug; 3 - Drain pipe; 4 - Expansion tank;...

Checking the Radiator Fan Drive
1. Make sure the radiator fan drive works when connected to the battery terminals (pic. 5.8). Pic. 5.8. Checking the Radiator Fan Drive 2. Check for abnormal noises when...