Valve seat — check

1. Install the valve, press it against the seat and measure the distance from the end of the stem to the working surface of the valve spring seat (pic. 4.18). If the measured value is out of range, replace the valve seat (tab. 4.8).

Table 4.8. Valve stem protrusion

Options		Set value, mm	Limit value, mm
Inlet valve	SOHC	49.30	49.80
	DOHC	46.70	47.20
	DOHC MIVEC	57.85	58.35
	DOHC GDI	46.65	47.15
Exhaust valve	SOHC	35	49.85
	DOHC	46.65	47.15
	DOHC MIVEC	58.13	58.63
	DOHC GDI	46.70	47.20