Tightening torques for elements and parts of 4G1 engines (Mitsubishi Colt 5, 1995-2003, petrol)

Engine mounting elements	Tightening torque, Nm
coolant pump pulley bolt	9
Generator rack (from the generator side)	22
Generator rack (tightened with coolant pump)	23
Alternator Stub Bolt	44
Oil gauge guide tube	23
Crankshaft center bolt	128
Spark plug	25
Distributor	11
Ignition coil	10
Camshaft position sensor	9
Camshaft position sensor support	13
Camshaft Position Sensor Cylinder	21
Timing Belt Tensioner	23
Crank angle sensor	9
engine mount bracket (left)	35
intermediate pulley	35
Camshaft Pulley Bolt	88
Vacuum tube and hose	9
Delivery pipeline	11
Fuel pressure control	9
throttle body	18
Fuel pump	11
Ventilation tube	22
Carburetor	17
Air temperature sensor	13
Exhaust gas Recirculation valve	21
Thermostat	27
Water temperature gauge	11
Water temperature sensor	29
Exhaust manifold M8	17
Exhaust manifold M10	29
Lambda probe	44
fuel pump cover	12
rocker cover	4
rocker axles	31
Adjusting bolt	15
Camshaft bearing cap	24
Cylinder Head Bolt Tighten to 49 Nm; then completely unscrew and tighten again to the required torque	20 + 90° + 90°
Gearbox support	23
Pallet	7
Threaded drain plug	39
oil receiver	18
Front body	13
pressure reducing valve	44
Oil pump cover	10
Nut of a bolt of fastening of a cover of a rod	17 + 90°to 100°
Flywheel	132
drive disc	132
Main bearing cap bolt	51
Oil pressure sensor	18
Knock sensor	23