The fuse box is located in front of the driver's seat.
 |  |
The fuse box is located in the engine compartment.
 |  |
Fuse load capacity
On the cover of the fuse box, the names of the electrical circuits and the characteristics of the fuses are indicated.
Vehicle interior
Spare fuses are in the fuse box.
When replacing a blown fuse, be sure to install a fuse with the same current rating.
* Depending on the model and specification of your vehicle, some fuses may not be included.
** No fuse (empty) (Only for RHD).
 |  |
Fuse replacement
1. Before replacing a fuse, be sure to turn off this electrical circuit and turn the ignition key to the «LOCK».
2. Remove the fuse box cover.
3. According to the fuse rating table, set the rating of the blown fuse.
4. In fuse box (in the cabin) There is a fuse extractor. First remove the fuse from the box by pulling it straight out towards you. If it does not burn out, then something else is causing the problem, and contact an authorized Mitsubishi dealer to identify and fix it.
5. Insert a new fuse with the same rating into the clip securely.