General steering information The steering column is energy-absorbing and tilt-adjustable. The power steering is integrated with the rack and pinion steering mechanism, in which the rack, together...
Steering wheel clearance check 1. With the engine running, put the front wheels in the straight ahead position. 2. Turn the steering wheel in both directions until the wheels begin to move. This free...
Steering wheel and steering shaft — design description The steering wheel and steering shaft are shown in fig. 13. For, b. Pic. 13.3a. Steering wheel and steering shaft: 1 - Decorative cover (vehicles without SRS); 2 -...
Power Steering — Design Description The power steering is shown in fig. 13.4a, b, lubrication and steering seals - in fig. 13.4c. Pic. 13.4a. 1 - Bolt; 2 - Clamp; 3 - Cotter pin; 4 - Tie rod end; 5 - Drain...
Power steering — disassembly and assembly Disassembly Removing the rack stop cover 1. The stop cover is unscrewed from the steering gear housing using a special tool MB990607 (pic. 13.5). Pic. 13.5. Removing the...
Power steering — adjustment Gear torque adjustment 8. Set the gear rack to the middle position. Tighten the stop cover to a torque of 15 Nm. 9. Rotate the gear shaft clockwise from the neutral...
Power Steering Pump — Design Description The power steering pump for vehicles with 4G1 engines is shown in fig. 13.17a, power steering pump for cars with 4G9 engines - in fig. 13.17b. The disassembled pump is...