Differential elements
1 - bearing; 2 - axis; 3 - differential box; 4 - bushing; 5 - washer; 6 - satellite; 7 - axle gear; 8 - differential gear.
Disassembly
Loosen the bolts and remove the differential drive gear.
Remove the tapered roller bearings, cotter pin, pinion, gears and washers.
Remove side gears and spacers.
Check the condition of the gears and bearings. Clean them and dry them. Apply gear oil to them before assembly.
Assembly
Install the axle gears of the 4th spacers.
Install cotter pin (3), axes of satellites (1) satellites (2) and pucks. Measure the clearance between the axle gears and washers. It should be 0.025-0.150 mm. If the gap does not comply with the standard, the assembly must be re-assembled using other spacers.
Install tapered roller bearings (5).
Tighten the bolts in the specified sequence (as per picture).