General description of mechanical transmission Depending on the model and year of manufacture, five-speed gearboxes of various modifications are installed on cars. When starting and accelerating the car, the torque...
Gearbox — removal and installation (later models) Late year gearbox fittings 1 - clutch slave cylinder; 2 - control cables; 3, 5 - locking flange; 4 - support bracket; 6 - bottom bracket; 7 - crankshaft position sensor;...
Gearshift drive for early model years Typical elements of the gearshift mechanism of models of early years of production 1 - gear lever handle; 2 - a box of the middle console; 3 - rear part of the middle...
Removal and installation of the gear change drive Elements of the gearbox control mechanism for models of later years of production 1, 5 - connection of the gear shift cable; 2, 6 - connection of the gear selection...
Gear lever — removal and reassembly Elements of the gear lever 1 - body; 2 - lever; 3, 4 - bushing; 3 - cover; 6 - nest; 7 - lever; 8 - hinge socket; 9 - clip. Removing Pull up to remove the shift knob....
Gearbox Repair Recommendations When checking and assembling, wash all parts with solvent and dry with compressed air Lubricate oil seals with clean gear oil and thrust bearings with petroleum jelly....
Checking and changing the oil in the gearbox Level check Having installed the car on a horizontal platform, unscrew the filler plug (1) and check the oil level (2). The oil level should be at the level of the lower...
Reverse gear lock — check operation If the reverse gear lock ring does not pull up, move the lever in the direction of reverse gear until it stops, then move it forward, shifting to 1st gear should occur....
Speedometer drive cable — replacement Removing After removing the decorative trim, remove the adapter retainer. Slightly pull the speedometer cable into the vehicle interior and remove the rear of the...
F5M21 Gearbox — Assembly Install magnet holder and two oil seals. Install the 3 outer bearing races and the oil guide ring. Install the differential drive gear assembly. Install the shaft...