Loosen the locknut on the throttle lever stop screw.
Turn the screw counter-clockwise until the screw is extended to the required amount, also fully close the throttle.
Tighten the screw until it touches the throttle lever (throttle opening point).
From this position, turn the adjusting screw an additional 1-1/4 turns.
While holding the throttle lever stop screw from turning, tighten the locknut securely.
Adjust the throttle cable tension. • Adjust idle speed.
Vehicles without TCL system
Adjust the position of the closed throttle position switch and throttle position sensor.
Cars with TCL system
Adjust the position of the throttle closed position switch and the accelerator pedal position sensor.