Checking the pipeline of the brake system

Raise the vehicle.

Clean the brake pipes with a cold cleaner.

Check the brake pipes from the master brake cylinder to the deck cylinders. The main brake cylinder is located in the engine compartment under the compensation tank of the brake system.

If the brake pipes are bent or dented, rusted or frayed, replace the pipe to the nearest connection.

Brake hoses must not be porous, swollen or damaged. Otherwise, they should be replaced.

Do not install kinked hoses.

When the steering wheel is turned fully to the left and to the right, the brake hoses in both positions must not touch any parts of the vehicle.

The joints of pipes and hoses must be dry.

Lower the car.