In addition to the usual set of screwdrivers and pliers, you need to purchase the following tool:
- metric wrenches, sockets and combination wrenches with a closed and open throat from 3 to 19 mm, as well as a candle wrench;
- jacks;
- chassis lubrication syringe;
- hydrometer for checking the battery;
- oil drain container;
- rag to remove dirt.
The main list of control equipment may include:
- tachometer;
- key for spark plugs;
- lamp (stroboscope) to check ignition timing (it is best to purchase a DC lamp that can be connected to the car battery);
- device/tool for adjusting spark plugs.
In addition, there are a number of other tools and devices that may be needed when repairing a car. These include:
- a device for measuring compression;
- vacuum gauge;
- control lamp;
- induction meter (used to check for current in a wire. A very useful device if you need to establish the integrity of the wiring).
Whenever a specific torque is required to be applied to a fastener, it will be specified in the appropriate place. If this data is not available, it is recommended to apply the following torques according to the dimensions of the fasteners.
Bolts without designation:
- 6mm bolt/nut: 7-8 Nm
- 8mm bolt nut: 16-23 Nm
- 10mm bolt/nut: 31-46 Nm
- 12 mm bolt/nut 56-80 Nm
- 14 mm bolt/nut 76-103 Nm
Bolts with designation 88 and above:
- 6mm bolt/nut: 8-13 Nm
- 8mm bolt/nut: 18-27 Nm
- 10mm bolt/nut: 37-54 Nm
- 12mm bolt/nut: 62-94 Nm
- 14 mm bolt/nut 102-137 Nm