2. Remove the fork pin.
3. Turn off fixing bolts and remove the cylinder.
4. Press the piston out of the cylinder with compressed air.
5. Clean the walls of the cylinder.
6. Inspect walls for scratches or wear and replace cylinder if necessary.
7.7 Elements of the working cylinder of the clutch release actuator
1. Plug; 2. Spring; 3. Pusher; 4. Case; 5. Piston and cap; 6. Conical spring; 7. cap; 8. Air release valve; 9. Cylinder
7. If the cylinder needs to be replaced, disassemble it completely (7.7).
7.8 Check that the cap is installed correctly
1. Piston; 2. Cap
8. When assembling the cylinder elements, lubricate them with clean brake fluid. Pay attention to the installation position of the spring and cap (7.8).
9. Installation is carried out in the reverse order of removal.