Removing
1. Remove the shroud, guard rail, and retainer.
16.2a Unscrew the bolts connecting the tubes of the air conditioning system to the condenser.
16.2b Use a support wrench to avoid twisting the tubes.
2. Disconnect the hose and tube from the condenser (16.2a, 16.2b).
16.3 Quickly seal exposed areas with masking tape
3. Close the openings to prevent dirt and moisture from getting inside (16.3).
4. Turn off bolts of fixing arms and remove the condenser from the car.
Installation
5. Installation is carried out in the reverse order of removal.
6. When installing a new condenser, add 10 g of oil.
7. Check the pressure and tightness of the air conditioning system.
16.4 When removing the condenser, move the fan as far as possible
1. Capacitor; 2. Radiator