Removing
1. Remove the fuel tank filler cap. Remove the air filter. Disconnect the accelerator cable from the throttle lever. On automatic transmission models, disconnect the low gear cable.
2. Tag all vacuum hoses and connections and disconnect the hoses.
3. Disconnect the fuel supply pipe from the carburetor. Label all wires and terminals and disconnect all connectors.
4. Turn off fixing bolts and remove the carburettor from an inlet collector. Remove the gasket. Plug the collector hole with a rag.
Installation
5. Remove traces of the old gasket from the carburetor and intake manifold and clean the contact surfaces with acetone or thinner.
6. Install a new gasket and install the carburetor on the manifold. Install the mounting bolts.
7. Gradually tighten the bolts in a diagonal pattern, turning them 1/4 at a time.
8. Further installation is carried out in the reverse order of removal.