Cordia, Precis and Tredia
1. Remove the power steering pump and alternator drive belts.
16.2 Alternator mounting elements on Cordia and Tredia models (other models are similar)
1. The pump of system of hydrostrengthening of a steering; 2. Bracket; 3. Generator; 4. Connector connection
2. Remove the power steering pump (16.2).
3. Remove the generator adjusting bracket, unscrew the lower fixing bolt, disconnect the connection connectors and remove the generator.
4. Installation is carried out in the reverse order of removal.
5. Adjust the tension of the drive belts.
Galant
6. Remove the left fan. Remove the power steering pump and alternator drive belts.
7. Remove the generator bracket, unscrew the lower fixing bolt, disconnect the connection connectors and remove the generator.
8. Installation is carried out in the reverse order of removal.
9. Adjust the tension of the drive belts.
Colt, Lancer, Mirage (1985-1988)
10. Remove the alternator drive belt and other belts, if necessary.
11. Turn off fixing bolts of the generator, mark and disconnect sockets of connection and remove the generator.
12. Installation is carried out in the reverse order of removal.
13. Adjust the tension of the drive belts.
Colt, Lancer, Mirage (1989 and later) 1.5L
14. Remove the power steering pump, air conditioning compressor and alternator drive belts.
16.15 Generator mounting elements on Colt, Lancer, Mirage 1.5L models (1989 and later)
1. Compressor drive belt; 2. Power steering pump drive belt; 3. Drive belt; 4. Water pump pulley; 5. Water pump pulley; 6. Bracket; 7. Connector connection; 8. Generator
15. Remove the alternator bracket (16.15), unscrew the lower fixing bolt, disconnect the connection connectors and remove the generator.
16. Installation is carried out in the reverse order of removal.
17. Adjust the tension of the drive belts.
1.6L
18. Remove the power steering pump and alternator drive belts.
16.19 Generator mounting elements on Colt, Lancer, Mirage 1.6L models (1989 and later)
1. Drive belt; 2. Power steering pump drive belt; 3. Water pump pulley; 4. Water pump pulley; 5. Bracket; 6. Connector connection; 7. Mount; 8. Battery; 9. Washer fluid reservoir; 10. Battery shelf; 11. Radiator; 12. Generator
19. Remove water pump pulleys (16.19).
20. Remove the generator bracket, remove the radiator, unscrew the lower mounting bolt, disconnect the connection connectors and remove the generator.
21. Installation is carried out in the reverse order of removal.
22. Adjust the tension of the drive belts.