Car steering Mitsubishi Colt 2 and 3

Steering — general description
1. All models have rack and pinion steering. The steering mechanism is connected to the pivot pins through the steering rods. The inner ends of the rods are protected by...

Steering wheel — removal and installation
1. Disconnect the negative battery terminal wire. 16.2a On some models, unscrew the screws securing the horn panel to the steering column (Galant model shown) 16.2b Lift...

Intermediate shaft — removal and installation
1. Set the front wheels straight and raise the vehicle. 17.2a Elements of the steering column 1. Finishing panel; 2. Clamp; 3. Air nozzles; 4. Coupling bolt; 5. Sound...

Steering gear — removal and installation
Removing 1. Raise the vehicle and place it on stands. 18.2 Disconnect the high pressure pipe (1) and return pipe (2) - the number 3 marks the lower coupling bolt of the...

Tie rod ends — removal and installation
Removing 1. Raise the car and remove the front wheel. 19.2a Loosen the locknut while holding the tie rod with a wrench 19.2b Mark the installation position of the tip on...

Steering gear covers — replacement
1. Raise the car and remove the front wheel. 2. Remove the tie rod end and lock nut. 3. Remove the boot clamps and remove the boot. 4. Before installing a new boot, wrap...

Power steering pump — removal and installation
1. Disconnect the negative battery terminal wire. 2. Loosen the pump drive belt and remove the belt. 3. Pump out the hydraulic fluid from the tank. 21.4 To remove the...

Power steering system — bleeding
1. If, when performing any operations, you disconnected the hydraulic hoses of the power steering system, the system must be bled in order to remove all air from it and...