| Brake fluid type | See Chapter 1 |
| Clearance between servo pushrod and master cylinder piston | |
| Precis (1989 and before) | 0.40-0.80mm |
| Precis (1990 and later) | 0 at 500mmHg |
| Galant (1988 and before) | 1.5-1.9mm |
| Galant (1989 and later) | |
| Servo amplifier with a diameter of 17.5 and 20 cm. | 0.5-0.7mm |
| Servo amplifier with a diameter of 22.5 cm. | 0.8-1.0mm |
| Cordia/Tredia (1983 and 1984) | 0.1-0.5mm |
| Cordia/Tredia (1985 and later) | 0.4-0.8mm |
| Colt, Lancer, Mirage (1988 and before) | 0.40-0.80mm |
| Colt, Lancer, Mirage (1989 and later) | 0.5-0.7mm |
| Hand brake lever travel | 5-7 clicks |
Disc brakes
Minimum allowable friction material thickness See Chapter 1.
The minimum allowable brake disc thickness is indicated on the disc.
Disc runout 0.15 mm max.
Drum brakes
| Minimum allowable brake pad friction material thickness | See Chapter 1 |
| Maximum allowable brake drum diameter | is indicated on the drum |
| Drum ovality (maximum allowable) | 0.015mm |
Torques, Ft-lbs
| Mounting bolts or caliper pins | ||
| Pin or bolt 8 mm diameter | 11 | |
| 10 mm finger | 15 | |
| 14 mm finger | 20 | |
| Inner and outer caliper mounting bolts (Sumitomo calipers) | 22 | |
| Caliper mounting bracket bolts | 55 | |
| Front brakes | ||
| Sumitomo Calipers | 77 | |
| Tokico calipers | 55 | |
| All others | 33 | |
| Rear brakes | ||
| Brake Hose Banjo Bolt | 25 | |
| 1990 and later Mirage models | 22 | |
| All others | 55 | |
| Wheel cylinder mounting bolts | 33 | |
| Brake shield to rear axle bolts | 10 | |
| Nuts for securing the master cylinder to the servo | 15 | |
| Nuts for fastening the servo amplifier to the rear wall of the engine compartment | 11 | |
| Precis models 1990 and later | 15 | |
| All others | 17 | |
| Brake pedal bracket to bulkhead nuts | 33 | |
| 1990 and later Colt, Lancer, Mirage models | 55 | |
| All others | 77 | |
| Wheel nuts | See Chapter 1 | |